Your account
Your licences, billing, installers and the live dashboard of each Victron GX running MESSX.
Setting up your account…
Confirming your payment with Stripe. This takes a few seconds.
Sign in
Use the email you bought the licence with. We email you a 6-digit code: no password to remember.
No licence yet? Buy one in the shop.
Install on a GX
Pick how you want to put MESSX on the GX. Your licence key is built in. Updates after that install by themselves.
- On the GX (touchscreen or Remote Console): Settings → General → Access level → Superuser (press and hold the right button for a few seconds), set a root password, and switch SSH on LAN on.
- Download the installer for your computer (it is on the same network as the GX):
- Open it. Mac: open the downloaded Install MESSX.command; if macOS says it can't check the file, go to System Settings → Privacy & Security → Open Anyway. Windows: open the downloaded Install MESSX program; if Windows says it protected your PC, click More info → Run anyway.
- It finds the GX by itself. Press Enter and type the GX root password when asked. It says Done after about a minute, and MESSX turns on.
- On the GX: Settings → General → Access level → Superuser (press and hold the right button for a few seconds), set a root password, switch SSH on LAN on. Note the GX's IP address (Settings → Wi-Fi or Ethernet).
- Install the free Termius app: iPhone / iPad · Android. Your phone must be on the same Wi-Fi as the GX.
- In Termius: New host → address: the GX's IP, username: root, password: the root password → Connect.
- then paste it in Termius and press Enter. It says done after about a minute.
- (venus-data-messx.tar.gz, about 1 MB). On a phone it goes to Files / Downloads.
- Copy it to a USB stick (a USB-C stick plugs straight into most phones) or a microSD card. Don't rename it.
- Put the stick in the GX and restart the GX (Settings → General → Reboot). MESSX installs while it starts, then take the stick out.
About your licence
What if the boat or RV is offline?
Nothing at first. Each GX checks the licence with messx.io every few hours and keeps its last signed answer, so MESSX keeps running until 14 days after the date you are paid up to. As soon as it is online again it checks in and carries on.
What stops when a licence runs out?
Only MESSX: its smart-device switches, web page, dashboards and chartplotter page. The GX puts its own Victron start page back and your Victron system keeps running exactly as before. Renew under Billing and the GX switches MESSX back on at its next check-in (within 6 hours, or straight away with a reboot).
Moving the licence to another GX
Press "Free this slot" on the old device above, then install on the new GX with the steps above. To add devices, buy another licence (it shows up here when you buy it with this email), or write to info@messx.io and we will add them to yours.
Removing it
Cancel under Billing and MESSX switches itself off at the end of the paid quarter; your Victron system carries on as before. To take it off the GX completely, write to info@messx.io and we will walk you through it. Keep the USB stick out of the GX, or it installs again at the next restart.
Questions: info@messx.io · (206) 459-6392 · Licence terms · Privacy